Contact us | Privacy Policy |
Disclaimer | Site Map |
Top Tip
Providing Clean Reliable Water to all
home » Water • India Mark III Hand Pump
Water Pumps
Hand & Treadle Pumps
    Submersible Pump
    Centrifugal Pump
    Industrial Pump
Solar Pumps
Water Treatment Equipments
Reverse Osmosis
    Iron Removal Plants
    Desalination Plants
    Chemical Treatment Plants
Water Testing
Field Test Kits
Portable Labs
    Digital Test Meters
India Mark III Deep Well Hand Pump


Minimum bore size : 100 mm.
Internal dia. of Cylinder : 50 mm
Stroke length : 225±3 mm.
Operating depth (approx.) : 17 liters per minute of 40 strokes
Cylinder : up to 45 meters.


Made from 2 mm CR Sheet.
Same as Standard but welded with Riser Pipe Holder made from Seamless Tube to hold 65 mm. NB Riser Pipes.
The Stand Flange is made from 6 mm thick MS Plate. The Pipe used is 150 mm NB Medium Class Pipe for Normal Stand and for Telescopic Stand the Pipe used is 150mm NB, 175mm NB Medium Class. The Angles are 40 x 40 x 6 mm.
12 mm dia. MS Bright Rod in 3 meter length welded with M12 X 50 and M12 X 20 Internal Threaded Coupler. There are several options like Mild Steel (Electro-Galvanized), Stainless Steel & GFRP (Glass Fiber Reinforced Plastic) Connecting Rods.
63.5 mm. I.D. Cast Iron or µPVC Cylinder with Brass Liner with Top Cap suitable to be connected to 65MM NB Pipe and Bottom Cap suitable to receive pick up Foot Valve Plunger with two Nitrile Cup Washers, Plunger with Extended Thread arrangement to pick up the Foot Valve (Check Valve) and tripping the water while extraction of Plunger and Check Valve Assembly without removal of the 65MM. NB. G.I. Riser Pipes. Plunger Rod made of Stainless Steel. The Upper Valve will be of two pieces. Cylinder can also be supplied in PVC, which again is an innovative concept, by BIAC’s R & D team. This PVC cylinder, while imparting the same functions, as that of Cast Iron Cylinder is also lightweight thereby providing case of handling and enhances the life of the Riser Pipe.
65MM Nominal bore Galvanized Iron Pipes of medium class or µPVC with SS & GFRP. The following are hot-dip galvanized to prevent corrosion problems Head, Handle, Front Cover, Water Chamber and Stand

For more details about this pump, please click here to read on.......

* Design and technical specifications are subject to change without notice

Kenya Office
Water Africa Services Ltd,
off Mombasa Road, Near City Cabanas
P. O. Box 3730 - 00100, Nairobi, Kenya
t: +254 (20) 6750349/452, 82523/39/41/2, 201833
f: +254 (20) 825240 / 2081010
Cell: +254 (733) 750139
Cell: +254 (722) 389456
Sudan Office
Water Africa Services Ltd,
Munuka Road Juba, South Sudan
Gemtel: +256 (477) 126575 /76/77,
thuraya:+8821 6212 76424 / 432
Zain:+249 917041821/822
Sudani: +249 (12) 6183451, 6298512/514