Contact us | Privacy Policy |
Disclaimer | Site Map |
Top Tip
Providing Clean Reliable Water to all
home » Water • India Mark II Deep Well Hand Pump
 
Water
 
Water Pumps
 
Hand & Treadle Pumps
    Submersible Pump
   
    Centrifugal Pump
    Industrial Pump
 
Solar Pumps
 
Water Treatment Equipments
 
Reverse Osmosis
 
Desalination
    Iron Removal Plants
    Desalination Plants
    Chemical Treatment Plants
 
Water Testing
 
Field Test Kits
 
Portable Labs
    Digital Test Meters
     
 
India Mark II Deep Well Hand Pump



INDIA MARK II DEEPWELL HAND PUMP

Minimum bore size : 100 mm.
Internal dia. of Cylinder : 50 mm
Stroke length : 225±3 mm.
Operating depth (approx.) : 17 liters per minute of 40 strokes
Cylinder : up to 45 meters.

 

a
The above-ground mechanism is fabricated from welded steel plates and sections for strength, and hot-dip galvanised for corrosion resistance.
b
A chain and quadrant mechanism of the pump handle provides easy and accurate alignment of the connecting rod.
c
The handle bar has a high mechanical advantage and is designed to counter balance the weight of the connecting rods to reduce the pumping effort required by the user.
d
A unique pivot assembly (sealed ball bearings for the handle on a stainless steel axle) adds to the ease of operation and lower maintenance needs.
e
125 mm stroke length of the handle provides a water discharge of 17 liters per minute per 40 strokes with the cylinder installed in the range of the 15 m to 45 m below-ground level.
f
The water tank assembly has an appropriate coupler to suit 32 mm NB medium class galvanized iron (Gl) riser pipes or µPVC pipes.
g
Riser pipes are comprised of locally available standard 32 mm NB Gl pipes. Other options such as upvc, HDPE & FGP are also available.
h
Connecting rods are of cold drawn bright steel bar with threaded and couplers and are electro-galvanised against corrosion. Alternatively stainless steel rods or FGP rods are also available for better performance.
i
The cylinder is made from a cast iron casing with a polished brass liner and gun metal plunger and check valve components. Seals (pump buckets, valve seals and cap seals) are available in environmentally safe nitle rubber. Other options include stainless steel, brass and µPVC. With minor modifications this pump can be easily adapted for shallow wells, windmills and motorised operations.


For more details about this pump, please click here to read on.......

* Design and technical specifications are subject to change without notice

Kenya Office
Water Africa Services Ltd,
off Mombasa Road, Near City Cabanas
P. O. Box 3730 - 00100, Nairobi, Kenya
t: +254 (20) 6750349/452, 82523/39/41/2, 201833
f: +254 (20) 825240 / 2081010
Cell: +254 (733) 750139
Cell: +254 (722) 389456
e:info@waterafrica.net
e:waterafrica@fastmail.fm
e:watrafrica@wananchi.net
Sudan Office
Water Africa Services Ltd,
Munuka Road Juba, South Sudan
Gemtel: +256 (477) 126575 /76/77,
thuraya:+8821 6212 76424 / 432
Zain:+249 917041821/822
Sudani: +249 (12) 6183451, 6298512/514
e:jubawater@waterafrica.net