Contact us | Privacy Policy |
Disclaimer | Site Map |
Top Tip
Providing Clean Reliable Water to all
home » Water Drilling • Drilling Consumables • Drilling Liquid
 
Water Drilling
 
Drilling Rigs
 
Rotary Drilling Rig
 
Combination Drilling Rig
    Portable Drilling Rig
 
Drilling Tools
 
DTH Hammers
 
Button Bits
    Hole Openers
    Drilling Rods
    Rock Roller Bits
    Drag Bits
    Water Dipper
    Rig Spares
 
Drilling Consumables
 
Steel Casing/Screens
 
PVC Casing/Screens
    Drilling Liquid
    Drilling Foam
    Crystal Polymers
    Bentonite
 
Air Compressor
 
For Drilling Rigs
 
Industrial Purpose
    General Purpose

     
 
Rig Spares

S 100 ROCK FLUID - (Lubricant )
Description: S100 ROCK FLUID is a specially formulated lubricant that reduces friction between rock and rock, as experienced in ore-passes. This product has been used for years by mines to either prevent ore pass hold ups or to help in getting ore-passes unstuck
Application/
Functions :
  • Prevention of ore-pass hang-ups.
  • Helps in brining down ore pass blockages
Advantages:
  • Economical and efficient
  • Environmentally acceptable
  • Biodegradable
  • Easy to use
Typical Appearance :
  • Appearance; light coloured liquid
Recommended
Treatment :
  • RECOMMENDED TREATMENT FOR OREPASSES THAT TEND TO HANG-UP:

    OCCASIONALLY
    : 1 Drum (210 Kg) S100. After 2 hours, 1 drum water (210 Kg). After 2 hours, 1 drum S100 (210 Kg), etc. Continue cycle until ore-pass is clear.

    REGULARLY
    : 1 drum S100 (210 Kg). After 1 hour, 1 drum water (210 Kg). After 1 hour, 1 drum S100 (210 Kg), etc., until the ore-pass is clear.

    SEVERE
    : 1 drum S100 every hour.

    SCALING OF PASSES
    : From 1 drum per day per pass up to 3 drums per day per pass.

Packaging:

  • Available in 25 Kg and 210 Kg steel drums


BIOLUBE - (High-pressure rock/hammer-drill lubricant )
Description: BIOLUBE is a specially formulated extreme pressure rock/hammer-drill lubricant designed to reduce torque by providing a low friction environment. BIOLUBE is biodegradable, environmentally friendly and non-hazardous when used as directed. BIOLUBE is available in various viscosity grades, enhanced with anti-wear, anti-rust and oxygen scavenger additives
Application/
Functions :
  • Reduces torque and frictional drag in the rock/hammer-drill bit
  • Minimises wear in the rock/hammer drill bit
  • Extends rock/hammer drill life
  • Gives a very high film strength to minimize wear
Advantages:
  • Economical and efficient
  • Environmentally acceptable
  • Biodegradable
  • Available in various grades for various applications
  • Easy to use
  • Minimum carbon deposits
Typical Appearance :
  • Appearance; Amber colored liquid
  • Non-water soluble

Packaging:

  • Available in 25 Kg steel drums and 205 Kg Steel drums

CLEANING AGENTS -
Drilling detergents and general degreaser
---------------------------------------------------------------------------

BORDET - (Cleaning Agent)

Description: BORDET is a very powerful cleaning agent. It is used to prevent drill bit chatter and drill cuttings accumulating around the drill bit. BORDET contains a powerful solvent to ensure that the drill bits cutting edge and grooves stay open and clean. Use at a concentration level of 0,1% to 0.2% on a continuous basis, but for difficult to remove drill cuttings, add 5 liter to 20 liter water directly into the drill hole. BORDET is compatible with most SAMCHEM products.

Packaging:

  • BORDET is packed in 50 Kg plastic drums.

STRIPALL - (Cleaning Agent)

Description: STRIPALL is a water-soluble degreaser used to remove excessive grease or all the grease from a drill hole. Recommended dosage is 200-litres/1000 meter drill hole.

Packaging:

  • STRIPALL is packed in 25 Kg, 50 Kg and 100 Kg plastic drums.

ENGINE CLEANER - (Cleaning Agent)

Description: Engine cleaner is a very powerful degreasing agent. It is used to clean any areas where degreasing is necessary, be it to clean a rig, wash vehicles engines, etc. Use at a concentration level of 0,5 % in water, applying by either manual method, brush, rag, etc., or by using a high-pressure sprayer.

Packaging:

  • Engine cleaner is packed in 25 Lt plastic drums


LUBTAC/MAFUTA GREASE - (Lubricating grease )
Description: LUBTAC/MAFUTA GREASE is a rod grease formulated from synthetic hydrocarbons and vegetable oils. This unique formulation has made SAMCHEM one of the world leaders in the manufacture of biodegradable, non-toxic environmental friendly greases.
Application/
Functions :
  • Reduces torque and frictional drag on the drill rods
  • Minimises wear on drill string
  • Protects the rods
  • Minimises stuck rods
  • Used in underground mining, due to high temperature stability
Advantages:
  • Economical and efficient
  • Environmentally acceptable
  • Biodegradable
  • Improved production
  • Stable at high pressures and temperatures
  • Lowers shearing on rods
  • Improves coring ability and the quality of the core
Typical Appearance :
  • Appearance; Light brown colored grease
Recommended
Treatment :
  • Apply a generous amount smeared on the outside of the drill rods

Packaging:

  • Available in 2 Kg plastic sausages and in 20 Kg tins and 200 Kg metal drums


ECO-LUBE - (High pressure lubricant )
Description: ECO-LUBE is a specially formulated extreme pressure lubricant designed to reduce rotary torque by providing a low friction environment for diamond drill rods. ECO-LUBE was developed for use in hard or saline water. Even under extreme conditions, ECO-LUBE's unique characteristics provide maximum reduction of torque in a wide variety of water types. ECO-LUBE is biodegradable, environmentally friendly and non-hazardous when used as directed.
Application/
Functions :
  • Reduces torque and frictional drag on the drill rods
  • Minimises wear on drill string
  • Extends bit life
  • Facilitates faster and more efficient drilling
  • Improves bit penetration
Advantages:
  • Economical and efficient
  • Environmentally acceptable
  • Biodegradable
  • Suitable in a wide range of water types
  • Easy to mix and use
  • The reduction in torque allows an increase in RPM's which could improve the ROP
  • Reduces rod vibration
Typical Appearance :
  • Appearance; Amber colored liquid
Recommended
Treatment :
  • Add 2.0 Lt. to 7.5 Lt per 1000 Lt water
  • Add directly at the pump suction
  • Use an injection pump or set up a suction hose from the rig pump

Packaging:

  • Available in 25 Kg, 50 Kg and 100 Kg
    plastic drums


T-LUBE - (Tricone bit lubricant )
Description: T-LUBE is a specially formulated extreme pressure lubricant designed to reduce rotary torque (thus lower power consumption), increase drill bit life and increase penetration rate for tricone drilling by creating a low friction environment during drilling. T-LUBE is especially effective in lubricating and cleaning bearings of blast hole bits and has proven to extend the life of bearings extensively. T-LUBE is biodegradable, environmentally friendly and non-hazardous when used as directed
Application/
Functions :
  • Substantially increases bearing life
  • Reduces torque and frictional drag on the drill rods
  • Minimises wear on drill string
  • Extends bit life
  • Facilitates faster and more efficient drilling
  • Improves bit penetration
  • Reduces wear and tear on the drill rig and drill rods
Advantages:
  • Economical and efficient
  • Economical and efficient
  • Environmentally acceptable
  • Biodegradable
  • Suitable in a wide range of water types
  • Easy to mix and use
  • The reduction in torque translates to savings in power consumption
  • Reduces vibrations on drilling rig and drill rods
  • Decreases power consumption, increases ROP, increases drill bit life and decreases wear and tear on the drill rig
Typical Appearance :
  • Appearance; Amber colored liquid
Recommended
Treatment :
  • Apply at a rate of about 3 Lt/hr. passing the tricone bit
  • Add directly into water tank or use an injection pump

Packaging:

  • Available in 25 Kg, 50 Kg and 100 Kg plastic drums or 1000 Lt bulk bins
Kenya Office
Water Africa Services Ltd,
off Mombasa Road, Near City Cabanas
P. O. Box 3730 - 00100, Nairobi, Kenya
t: +254 (20) 6750349/452, 82523/39/41/2, 201833
f: +254 (20) 825240 / 2081010
Cell: +254 (733) 750139
Cell: +254 (722) 389456
e:info@waterafrica.net
e:waterafrica@fastmail.fm
e:watrafrica@wananchi.net
Sudan Office
Water Africa Services Ltd,
Munuka Road Juba, South Sudan
Gemtel: +256 (477) 126575 /76/77,
thuraya:+8821 6212 76424 / 432
Zain:+249 917041821/822
Sudani: +249 (12) 6183451, 6298512/514
e:jubawater@waterafrica.net